HP-UX Virtual Partitions Administrator's Guide (includes A.04.04) (previously titled Installing and Managing HP-UX Virtual Partitions)

Monitor and Shell Commands
Monitor: Using Monitor Commands
Chapter 5
137
• settime [ MM DD YYYY hh mm ss ]
sets the system's real time clock. Acceptable date range is 1-1-1970 00:00:00 to 12-31-2034 23:59:59.
• threads
controls the use of hyperthreading on servers with dual core Intel Itanium 2 processors. For usage
information, see “CPU: Hyperthreading ON/OFF (HT ON/OFF)” on page 230.
• time
displays system real time clock and OS time of all the virtual partitions in GMT (Greenwich Mean Time).
The OS time displayed will consider the RTC and clock drift for the virtual partition. However, if the
partition is up, there may be difference in the OS time displayed.
• toddriftreset
resets the drifts of the real-time clock. Use this command if you reset the real-time clock of the hard
partition at the BCH prompt. For brief information, see “Real-time clock (RTC)” on page 25.
• vparinfo [partition_name]
This command is for HP internal use only.