HP-UX Virtual Partitions Administrator Guide (includes A.05.09) (5900-2188, March 2012)

The ls command-line options are the same as the Unix shell lsoptions. For detailed
explanations, see the ls(1M) manpage. In brief:
all entries-a
long listing-l
numerical UIDs and GIDs-n
inode-i
appends a character after the entry, depending on the file type, such as a / (slash) for a directory-F
For example, to view the listing of files in winona2’s /stand directory:
MON> ls /stand
lost+found ioconfig bootconf system
system.d vmunix dlkm.vmunix.prevbuild
kernrel rootconf vpdb vpmon.dmp
vmunix.backup system.prev vmunix.prev dlkm
vpdb.backup vpmon
• monadmin
controls the vPars flexible administrative capability feature, as described in Chapter 11: “vPars
Flexible Administrative Capability” (page 260). For usage information, see “monadmin”
(page 263).
• scan
lists all hardware discovered by the vPars Monitor and indicates which virtual partition owns
each device.
• settime [MM DD YYYY hh mm ss]
sets the system's real time clock. Acceptable date range is 1-1-1970 00:00:00 to 12-31-2034
23:59:59.
• threads
controls the use of hyperthreading on servers with dual core Intel Itanium processors. For usage
information, see “CPU: Hyperthreading ON/OFF (HT ON/OFF)” (page 193).
• time
displays system real time clock and OS time of all the virtual partitions in GMT (Greenwich
Mean Time). The OS time displayed will consider the RTC and clock drift for the virtual partition.
However, if the partition is up, there may be difference in the OS time displayed.
• toddriftreset
resets the drifts of the real-time clock. Use this command if you reset the real-time clock of the
hard partition at the BCH prompt. For brief information, see “Real-time clock (RTC)” (page 21).
• vparinfo[partition_name]
This command is for HP internal use only.
vPars Monitor: Using the vPars Monitor Commands from ISL or EFI
You can specify any of the vPars Monitor commands either at the vPars Monitor prompt (MON>)
or at the ISL prompt (ISL>). If you are at ISL or EFI, use the desired command as the argument for
the vPars Monitor /stand/vpmon.
For example, to run the command vparload -p winona1 from the vPars Monitor prompt, use
MON> vparload -p winona1
To run the same command from ISL or EFI, use
132 vPars Monitor and Shell Commands