HP Superdome 2 Partitioning Administrator Guide

Partition Partition
Number Name
--------- ---------
1 nPar0001
2 nPar0002
2:1 nPar0002:vPar0001
Q) Quit
Select partition number: 2:1
----Log Snippet---------
----Log Snippet---------
Welcome to the Superdome 2 console
<use <Ctrl-b> to exit.>
Shell>
Alternatively, you can also use the CONNECT PARTITION command to connect to a partition.
connect partition 2
----Log Snippet---------
----Log Snippet---------
Welcome to the Superdome 2 console
<use <Ctrl-b> to exit.>
Getting a Console Using the GUI
To access a partition's system console using the GUI, select the Remote Console tab and click
on the Remote Serial Console link.
Figure 6-8 Remote Console Tab (nPar)
Figure 6-9 Remote Console Tab (vPar)
Confirming the Installed IO cards
Once the system console has been accessed, and the partition has been booted to EFI, the EFI
commands info io and devices can be used to display the contents of the I/O bays as shown
in the following example:
info io
PLATFORM I/O INFORMATION
52 Booting and Resetting Partitions (nPartitions and vPars)