HP Superdome 2 Partitioning Administrator Guide

Table 3-1 nPartition Commands Descriptions (continued)
DescriptionCommand
Configure partition configuration privilege for nPartitions and vPars.
NOTE: This command is available only from the OA.
parperm
Remove an existing nPartition.
parremove
Display nPartition information and hardware details for a server complex.
parstatus
nPartition Resources
On an HP Superdome 2 system, you can create or manage nPartitions, assigning them the
following resources:
• Blade A blade consists of CPUs, memory, blade I/O (which includes LAN on Motherboard
(LOM) modules and iLO).
• I/O Bay An I/O Bay consists of six PCIe slots.
You can view the number of resources on HP Superdome 2 using the parstatus command in
the OA CLI. A sample parstatus command output is as shown below:
parstatus
NOTE: No action specified. Default behavior is display all.
[Complex]
Complex Name: Complex1
Complex UUID: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
Complex Capacity
Compute Enclosure: 1
IO Enclosure: 8
Monarch OA Location: 1
Model: N/A
Original Serial Number: Unset
Current Product Order Number: AH337A
OEM Manufacturer: N/A
Total number of partitions present: 0
[Enclosure]
Enclosure Enclosure Num Num Bay Enclosure
Num Type Blades IOBays Slots Name
========= ========= ====== ====== ===== =========
1 Compute 8 0 8 stanley
5 IO 0 2 2 -
6 IO 0 2 2 -
7 IO 0 2 2 -
8 IO 0 2 2 -
9 IO 0 2 2 -
10 IO 0 2 2 -
11 IO 0 2 2 -
12 IO 0 2 2 -
[Blade]
Enclosure/ Usage/ CPU Memory Use Par Pending
Blade Status* OK/ (GB) On Num Deletion
Indicted/ OK/ Next
Deconf/ Indicted/ Boot
Max Deconf
========== ======================= ========= =============== ==== === ========
1/1 Inactive Base /OK 8/0/0/8 128.0/0.0/0.0 - - -
1/2 Inactive Base /OK 8/0/0/8 128.0/0.0/0.0 - - -
1/3 Inactive Base /OK 8/0/0/8 128.0/0.0/0.0 - - -
20 Getting Started with nPartitions