HP Integrity VM Accelerated Virtual I/O Overview

Figure 3 hpvmnet –A example output
Vswitch Name : vs_site
Max Number of Ports : 100
Configured Ports : 2
Port Number : 1
Port State : Active
Active VM : guest1
Untagged VlanId : none
Reserved VMs : guest1
Adaptor : avio_lan
Inbound Octets : 0
Inbound Unicast Pkts (wire) : 0
Inbound Unicast Pkts (local) : 0
Inbound Non-Unicast Pkts (wire) : 1079912830
Inbound Non-Unicast Pkts (local) : 4638189816014310
Inbound Discards : 5784959781214777
Outbound Octets : 1085366410661760
Outbound Unicast Pkts (wire) : 1085366410684661
Outbound Unicast Pkts (local) : 0
Outbound Non-Unicast Pkts : 4638189266258
Outbound Discards : 0
Port Number : 2
Port State : Reserved
Active VM :
Untagged VlanId : none
Reserved VMs : guest2
Adaptor : lan
Hpvmstatus
The hpvmstatus output now includes the avio_lan or avio_stor Adapter name for guests that are
configured with AVIO adapters. All other hpvmstatus output remains unchanged. For example, the
following status output will be shown when the command hpvmstatus –P guest2 is run: