HP Integrity Virtual Machines Release Notes Version A.03.50

• get_info
The following qualifier can be specified with the get_info command:
— lun — Shows lun information for a specific LUN or all LUNs.
When the get_info command is run without qualifiers, it returns information about the
Core I/O card / HBA represented by device_file.
• get_stat
The following qualifier can be specified with the get_stat command:
— lun — Shows statistics for a specific LUN or all LUNs.
When the get_stat command is run without qualifiers, it shows statistics about the
Core I/O card / HBA represented by device_file.
• replace_disk
The following qualifier must be specified with the replace_disk command:
— lun_def — Replaces the backing store device for a LUN with the backing store device
found during last open. If the-f option is not specified, gvsdmgr displays a warning
message before proceeding. Otherwise, it suppresses the warning message and executes
the command.
The gvsdmgr utility requires superuser privilege for execution. For information about privileged
access on systems that support fine-grained privileges, see the privileges manpage.
EXAMPLES
Display adapter information of the Core I/O card / HBA whose device file is/dev/gvsd0:
gvsdmgr get_info -D /dev/gvsd0
Display all LUN information of the Core I/O card / HBA whose device file is /dev/gvsdo:
gvsdmgr get_info -D /dev/gvsdo -q lun=all
Clear statistics for a LUN with device special file /dev/rdsk/c0t2d2 of the Core I/O / HBA
whose device file is /dev/gvsd0:
gvsdmgr clear_stat -D /dev/gvsd0 -q lun=/dev/rdsk/c0t2d2
AUTHOR
gvsdmgr was developed by HP.
8.21 Storage Driver not Listed in Installation Manual
Section 7.2.1.1 VM Storage Supportability, in the HP Integrity VM Installation, Configuration, and
Administration manual is missing the FibrChanl-02 (Driver Name FCLP) driver in the list of
supported drivers.
This driver will be added to the list the next time the manual is revised.
8.21 Storage Driver not Listed in Installation Manual 69