HP Integrity Virtual Machines 4.2: Installation, Configuration, and Administration

You can now monitor and manage the Windows guest using VM Manager and HP SMH. For
more information, see the HP Integrity Virtual Machines Manager 4.1 Software: User Guide manual.
To shut down a Windows guest, use the Windows system management procedures. The Integrity
VM commands for stopping guests do not shut down the Windows software properly and can
lead to problems when the Windows guest is rebooted.
5.4 Installing Integrity VM Windows Guest Management Software
After you install the Windows guest operating system, you must install the Integrity VM Windows
guest management kit from the VM Host system. When you install Integrity VM, the Windows
guest management kit is loaded into the following directory:
/opt/hpvm/guest-images/windows
This directory contains a README.TXT file that contains instructions for installing the Windows
guest management software on the Windows guest.
5.5 Troubleshooting Windows Guest Installation
You can use the following commands at the SAC> prompt:
• ID displays the host name and the system up time.
• I displays network information.
• S shows the system time and date.
• CMD creates a command-shell channel. Commands you can use in the command shell include:
— TASKLIST
— NET START “TERMINAL SERVICES”
— IPCONFIG
— SAFEBOOT
5.5.1 Remote desktop unable to connect
If the Windows guest is installed and on, but the Remote Desktop displays the following error,
you might have to set the required Windows Registry parameters:
Unable to connect
Set the following registry parameters:
• Set fDenyTSConnections to 0.
• Set TSEnabled to 1.
5.4 Installing Integrity VM Windows Guest Management Software 79