HP-UX Trusted Computing Services A.02.00 Administrator's Guide

6. After initiating a system reset, verify that the TPM is enabled by selecting Set Trusted
Platform Module from the Security Configuration Menu and pressing Enter. The
Set Trusted Platform Module window appears with Current Setting: Enabled if the
TPM is enabled.
Enter N.
Enabling the TPM from the EFI Shell
To enable the TPM from the EFI Shell, follow these steps:
1. Enter the following command at the EFI Shell prompt:
secconfig tpm on
For example:
Shell> secconfig tpm on
SYSTEM SECURITY CONFIGURATION
Trusted Boot: Not Supported
TPM: Enabled
TPM Vendor ID: 0x15D1
TPM Product ID: 0x0006
TPM TCG Spec Version: 1.1.0.0
* A reboot is required for security configuration changes to take effect.
During reboot, the chassis log displays BOOT_TPM_ACTIVATED, indicating that the TPM is
enabled.
SFW 0 0 0x0400008700E00000 000000FFFF06FF83 IO_LBA_INIT
SFW 0 0 0x0400008700E00000 000000FFFF07FF83 IO_LBA_INIT
SFW 0 0 0x0000008000E00000 0000000000000000 IO_DISCOVERY_DONE
SFW 0 0 0x00001B8100E00000 0000000000000000 BOOT_TPM_ACTIVATED
22 Installing TCS