Administrator's Guide

3. Select Launch to load the vMedia applet. The vMedia feature of iLO requires a Java Plug-in.
See the HP Integrity iLO 2 Operations Guide, available at http://www.hp.com/bizsupport
for detailed information on iLO vMedia.
NOTE: Only one user and one device can be connected at a time.
4. Select Local Media Drive and then select the correct DVD drive from the pull-down. Click
Connect. You should get a green light beside the virtual drive, as shown below.
5. Reboot the Integrity system from its console, interrupt the boot process, and then add a boot
option for vMedia. The console EFI menu sequence for adding a vMedia boot option follows.
Select Boot Option Maintenance Menu from the EFI Boot Manager.
243