SFM Release Notes for HP-UX 11i v3 March 2011
HP_Blade or the blade property page on HP SMH does not reflect the correct set of blades
on the system. Workaround: This problem has the following two workarounds:
1. Use the Onboard Administrator to determine the total number of blades on the system.
2. Disable SFMProviderModule using the cimprovider -dm SFMProviderModule
command. Run mv /var/opt/sfm/data/sdrcache /tmp/sdrcache command to move
the sdrcache file and enable SFMProviderModule cimprovider -em
SFMProviderModule
• Problem: CIM_AlertIndication.NetworkAddresses does not contain all assigned IP addresses.
Description: Indication delivered by SFM does not display all the IP addresses in
NetworkAddresses property of CIM_AlertIndication class when a new IP address is configured
or an old IP address is changed at runtime.
Workaround: To reflect newly configured IP Addresses in SFM Indication, disable and enable
SFMProviderModule using the following commands
cimprovider -dm SFMProviderModule
cimprovider -em SFMProviderModule
• Problem: The firmware version of Management Processor firmware (MFW), given by
MPProvider and FirmwareRevisionProvider on HP Integrity rx2800 i2 server may be incorrect.
Description: The revision number (third field in':' separated version string) may be incorrect.
Workaround: Run the sysrev command from MP to get the correct MFW version
Product Documentation
For more information on SFM, see the following documents at:
www.hp.com/go/hpux-diagnostics-sfm-docs
• Frequently Asked Questions (FAQs)
• System Fault Management Administrator's Guide
• SFM Provider Data Sheets
• SFM Tables of Versions
• SFM Patch Descriptions
• SFM Event Descriptions
Software and Documentation Availability in Native Languages
SFM software and documents are available only in the English language.
Product Structure
The SFM product, consisting of SFM providers and EVWEB, is installed as part of the
SysFaultMgmt bundle.
Following are the commands you must use to obtain the bundle, product, sub-product, and the
fileset information about the SysFaultMgmt depot. The generated output are examples from HP
9000 systems:
• Bundle
$ swlist -s <SysFaultMgmt Depot Location>
SysFaultMgmt C.07.03.xx.yy HPUX System Fault Managementt
• Product(s)
System Fault Management C.07.03.10.01 Release Notes HP-UX 11i v3 March 2011 13