SFM Release Notes for HP-UX 11i v2 September 2012

NOTE: The Enclosure Instance Provider is available on HP Integrity BL860c Server Blade and HP
Integrity BL870c Server Blade only.
What is new in this version
None
For information about the defect fixes, see Defect fixes.
Supported EMS hardware monitors
The following EMS monitors are supported on HP 9000 systems running the HP-UX 11i v2 operating
system:
• LPMC (now CPU) (lpmc_em)
• Memory (dm_memory)
• Core HW (dm_core_hw)
• Chassis Code (dm_chassis)
• Disk (disk_em)
• IPMI Forward Progress Log Monitor (fpl_em)
The following EMS hardware monitors are supported on HP Integrity® servers running the HP-UX
11i v2 operating system:
• Corrected platform error monitor (cpe_em)
• IPMI forward progress log monitor (fpl_em)
• CMC monitor (cmc_em)
• Itanium core hardware monitor (ia64_corehw)
• SCSI Disk Monitor (disk_em)
• Itanium memory monitor (memory_ia64)
Defect fixes
• QXCR1001158347
Problem: Frequent use of sfmconfig -w -e/s command causes core dump in
SFMProviderModule.
Resolution: This problem is fixed.
• QXCR1001166853
Problem: When you use sfmconfig -w -e/s command in loop, it might fail with the
Connection time out error.
Resolution: This problem is fixed.
• QXCR1001030403
Problem: The BPS_REMOVED event does not exist in CER.
Resolution: This problem is fixed.
• QXCR1001099039
Problem: The event # 267 has severity "informational". The severity is increased to Serious
or Critical.
Resolution: This problem is fixed.
• QXCR1001083300
Problem: The event # 3574 "VOLTAGE_FAULT" is not configured.
Resolution: This problem is fixed.
System Fault Management B.07.07.01.02 release notes HP-UX 11i v2 September 2012 3