Manualshelf

HP-UX WBEM System Fault Management (SFM) Administrator Guide (September 2013)

ManualsBrandsHP ManualsSoftwareHP-UX System Fault Management (SFM) Software
21222324252627282930
9. Unmount the CD. To unmount, enter the following command at the HP-UX prompt:
# unmount /tmp/cdrom
10. To verify whether the SysFaultMgmt (System Fault Management) (SFM) software is installed
properly, enter the following command at the HP-UX prompt:
# swlist | grep SysFaultMgmt
If the SysFaultMgmt (System Fault Management) (SFM) software is installed properly,
SysFaultMgmt and the version number of the SysFaultMgmt (System Fault Management) (SFM)
software are displayed in the output. If the SysFaultMgmt (System Fault Management) (SFM)
software is not installed properly, you must repeat the installation procedure. For more
information, see “Verifying the installation” (page 26).
Installing using the CLI
To install the SysFaultMgmt (System Fault Management) (SFM) software using CLI, complete the
following steps:
1. Log in to the system as a superuser.
2. Mount the CD to a location of your choice, as in the following example:
# mount /dev/dsk/c1t2d0 /tmp/cdrom
3. To install the SysFaultMgmt (System Fault Management) (SFM) software and all the
dependencies, enter the following command at the HP-UX prompt:
# swinstall -x autoselect_dependencies=true -x
enforce_dependencies=true -s /tmp/cdrom SysFaultMgmt
4. Unmount the CD. To unmount, enter the following command at the HP-UX prompt:
# unmount /tmp/cdrom
5. To verify whether the SysFaultMgmt (System Fault Management) (SFM) software is installed
properly, enter the following command at the HP-UX prompt:
# swlist | grep SysFaultMgmt
If the SysFaultMgmt (System Fault Management) (SFM) software is installed properly,
SysFaultMgmt and the version number of the SysFaultMgmt (System Fault Management) (SFM)
software appear in the output. If the SysFaultMgmt (System Fault Management) (SFM) software
is not installed properly, you must repeat the installation procedure. For more information, see
“Verifying the installation” (page 26).
24 Installing the SysFaultMgmt (System Fault Management) (SFM) software