HP-UX WBEM System Fault Management (SFM) Administrator Guide (September 2013)

Table 3 Indication providers (continued)
DescriptionIndication provider
example, if the name of the provider displayed in the event details
is MemoryIndicationProviderIA, the event is related to
memory. For a complete list of the names of providers displayed
in the WBEM indication details, in the SysFaultMgmt (System Fault
Management) (SFM) mode, see Table 8 (page 44). The provider
names indicate the device to which the event is related.
For a list of WBEM indications and their details, see the
SysFaultMgmt (System Fault Management) (SFM) Event Descriptions
at:
http://www.hp.com/go/hpux-diagnostics-sfm-events
The MCA indication provider generates an indication when
Machine Check Abort (MCA) logs are present due to an MCA.
MCAIndicationProvider
The MCA indication provider is available on all HP 9000 and
Integrity systems except for HP Integrity Superdome 2.
NOTE: The following apply to indication providers:
• The terms events and indications are used interchangeably.
• Although both EMS Wrapper provider and EVM CIM provider generate events related to
system hardware, the nature of events are different.
In addition, the support for CPUIndicationProvider and MemoryIndicationProvider has been added
with additional support for hardware events onHP Integrity BL860c i2, BL870c i2 &
BL890c i2 Server Blades, HP Integrity BL860c i4, BL870c i4, BL890c i4,
rx2800 i4 and rx2900 i4. The support for MemoryIndicationProvider has been added for
Legacy memory events and that for MemoryIndicationProviderIA for HP Integrity BL860c
i2, BL870c i2 & BL890c i2 Server Blades, HP Integrity Superdome 2, rx2800
i2, HP Integrity BL860c i4, BL870c i4, BL890c i4, and rx2800 i4 servers. For
the listing of new events reported by SysFaultMgmt (System Fault Management) (SFM) on these
indication providers, see the SFM Event Descriptions.
CIMOM identifies the SysFaultMgmt (System Fault Management) (SFM) providers using
SFMProviderModule. If a provider is not working properly, SFMProviderModule stops all the
SysFaultMgmt (System Fault Management) (SFM) providers.
Table 4 Instance / Indication providers support
IA NGIS providers
2
IA legacy provider
1
PA-RISC providerInstance / Indication providers
√√√CPUProvider and
CPUStatusProvider
√
Supported only on HP
Integrity BL860c i2, BL870c
√ХBladeProvider and
BladeStatusProvider
i2, BL890c i2, BL860c i4,
BL870c i4, and BL890c i4
√√√Environmental
√
Not supported on HP
Superdome 2
√√MemoryProvider and
MemoryStatusProvider
Supported only on HP
Integrity BL860c i2, BL870c
i2, BL890c i2, BL860c i4,
BL870c i4, BL890c i4,
Components of SysFaultMgmt (System Fault Management) (SFM) 15