HP-UX WBEM System Fault Management (SFM) Administrator Guide (September 2013)

Table 2 Instance providers (continued)
DescriptionInstance provider
The FMD instance provider does the following:Filter Metadata (FMDProvider)
• Provides the ability to predefine a filter in a repository
• Ensures that chosen indications are logged to the Event Archive
• Creates HP-advised subscriptions when SysFaultMgmt (System Fault
Management) (SFM) is installed
The Firmware Revision provider retrieves the following types of information:FirmwareRevisionProvider
• System firmware revision
• Management Processor (MP) firmware revision
The Management Processor provider retrieves information about the
management processor on the system.
MPProvider
The Enclosure instance provider retrieves the following types of information:EnclosureProvider and
EnclosureStatusProvider
• Onboard Administrator (OA) description
• OA IP address
• OA MAC address
• URL to launch the OA
NOTE: The Enclosure instance provider is available on all integrity Blade
systems except for BL60p and HP Integrity Superdome 2.
The Temperature Sensor provider retrieves the following types of information:
Describes properties such as sensor number, current temperature reading,
and temperature sensor status.
TemperatureSensorInstanceProvider
• Sensor number
• Current temperature reading
• Temperature sensor status
• Processor temperature
• Memory board temperature
On HP 9000 and HP Integrity ® systems running a supported version of
HP-UX, the Temperature Sensor provider retrieves information related to the
ambient temperature in the system. On HP 9000 and HP Integrity ® system
not supporting the system and numeric sensor, the Temperature Sensor
instance provider doesn’t retrieve any information.
Enables event analysis tools such as Web-Based Enterprise Services (WEBES)
to access details of indications generated by the SFMIndicationProvider
RecordLogProvider
that are available in the SysFaultMgmt (System Fault Management) (SFM)
database, for event analysis. The provider also supports MCA logs. Event
analysis tools can access MCA log details for event analysis.
For more information, see Recordlog and MCA indication provider at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/
c02578184/c02578184.pdf
The ComputerSystem Chassis provider retrieves properties such as the serial
number, product ID, and virtual Universally Unique ID (UUID). It provides
the following details related to the physical system:
CSChassisProvider
• SerialNumber
• ProductId
• Model
12 Introduction