HP-UX WBEM System Fault Management (SFM) Administrator Guide (September 2013)

Table 2 Instance providers (continued)
DescriptionInstance provider
• Blade Serial number
• Blade Part number
• Blade Status
NOTE: The Blade instance provider is available on HP Integrity BL860c
i2/BL870c i2/BL890c i2 Server Blades, HP Integrity Superdome 2, HP
Integrity BL860c i4, BL870c i4, BL890c i4, rx2800 i4 and rx2900 i4.
The CPU instance provider gathers the following types of information:CPUProvider and CPUStatusProvider
• Logical processor information, such as:
Current clock speed◦
◦ Processor family
◦ Processor status information, including configuration and
deconfiguration, failure status, and active and inactive status
◦ Load percentage
• Physical processor chip information, such as chip revisions and
architecture revisions
• Location details, such as:
◦ Location attributes such as cabinet number, cell number, slot number,
and so on. Only information for filled slots is available.
◦ Processor IDs
The Memory instance provider gathers the following types of information:MemoryProvider and
MemoryStatusProvider
• Memory slot information
• Memory module information, such as:
◦ Serial number
◦ Part number
◦ Memory capacity
◦ Module form factor
◦ Module status (for example, configuration status, failure status)
The Memory instance provider depends on the EMS Wrapper provider to
update the memory inventory on HP 9000.
The Environmental instance provider gathers information about the following
hardware components:
Environmental
• Fans
• Power supply
• Bulk power supply
• AC input lines
Enumeration of Power supply and Fan on a blade system is not supported.
Components of SysFaultMgmt (System Fault Management) (SFM) 11