HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

Installing SysFaultMgmt (System Fault Management) (SFM) software from
the web
SysFaultMgmt (System Fault Management) (SFM) depot is available for download on the OE
media and web. Starting from HP-UX 11i v3 September 2011 release, all the products namely
ProviderSvcsBase (PSB), SysFaultMgmt (System Fault Management) (SFM), the I/O Providers
namely HP-UX WBEM RAIDSA Provider, HP-UX WBEM SAS Provider, HP-UX WBEM FC
(Fibre-Channel) Provider, HP-UX WBEM DAS (Direct Attached Storage) Provider must be installed
together to maintain compatibility among the diagnostic products.
On web
September 2011 web release onwards, all the HP-UX 11i v3 version of WBEM providers and
Diagnostics products, are available for download on the WBEM Management bundle for HP-UX
11i v3 bundle page at https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?
productNumber=WBEMMgmtBundle.
NOTE: WBEM Management bundle of HP is released only on the web. All the products from the
WBEM Management bundle must be installed together. This is due to product interdependency.
These products might not work if they are installed individually.
Installing and upgrading products from the bundle
You need to install and upgrade the products from the bundle, as mentioned in the following
procedure.
1. Go to HP Software Depot at http://software.hp.com/.
2. Search for WBEMMgmtBundle and select WBEM Management bundle for HP-UX 11i v3. The
Overview page is displayed. This page provides the details of solution for installation/upgrade
of WBEM Management products bundle.
3. Go to the Installation page and review Prerequisites to ensure that your system meets the
requirements.
4. Select the Receive for Free >> option at the bottom right of the page.
5. Select the appropriate release of the HP-UX operating system.
6. Enter your registration information. Read and accept the terms and conditions.
7. Click Next >> at the bottom right of the page.
8. Click the appropriate link under Download Software to download the software. on to your
local system and install the bundle using the following command:
# swinstall -s / WBEMMgmtBundle
9. To verify if products in WBEMMgmtBundle are installed successfully, run the following command
at the HP-UX prompt:
# swverify <product name>
For example: Use the following command to verify SysFaultMgmt (System Fault Management)
(SFM) product
# swverify SFM-CORE
If the product is installed successfully on your system, the following message is displayed:
Verification succeeded
If the products are not installed successfully on your system, run the following command at the
HP-UX prompt to view the log file for errors:
# grep -i error /var/adm/sw/swagent.log
Fix the error and reinstall the product.
26 Installing SysFaultMgmt (System Fault Management) (SFM) software