HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

4. In the Specify Source window, select the appropriate location and click OK. The SD Install -
Software Selection window is displayed.
5. In the SD Install - Software Selection window, select Options-> Autoselect dependencies when
marking software.
6. Select Enforce dependency analysis errors in agent, and click OK, as shown in the following
figure. The Note window is displayed.
Selecting these options automatically installs all the dependencies.
NOTE: The system selects some options by default. However, you must select the two options
mentioned in step 5 to automatically install the prerequisites.
7. Click OK in the Note window to confirm the selection of dependencies.
8. In the SD Install - Software Selection window, select Actions->Install, as shown in the following
figure. You will need to install SysFaultMgmt (System Fault Management) (SFM), OnlineDiag
and ProviderSvcsBase (PSB) product together from the DiagProdCollection bundle due
to the product dependency. Verify the depot by using swverify command.
NOTE: SysFaultMgmt (System Fault Management) (SFM) is automatically configured after
it is installed.
Installing SysFaultMgmt (System Fault Management) (SFM) software from the media 23