HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

Table 3 Indication providers (continued)
DescriptionIndication provider
1. Generates WBEM indications equivalent to the events that the
monitors it replaces generate.
2. Reports these WBEM indications to the CIMOM.
In the WBEM indication details, the provider name displayed
corresponds with the device to which the indication is related. For
example, if the name of the provider displayed in the event details
is MemoryIndicationProviderIA, the event is related to
memory. For a complete list of the names of providers displayed
in the WBEM indication details, in SysFaultMgmt (System Fault
Management) (SFM) mode, see Table 9 (page 46). The provider
names indicate the device to which the event is related.
For a list of WBEM indications and their details, see
SysFaultMgmt (System Fault Management) (SFM) Event
Descriptions at:
http://www.hp.com/go/hpux-diagnostics-sfm-events
The MCA indication provider generates an indication when
Machine Check Abort (MCA) logs are present due to an MCA.
MCA (Machine Check Abort) Indication Provider:
MCAIndicationProvider
The MCA indication provider is available on all HP 9000 and
Integrity systems except for HP Integrity Superdome 2.
This provider generates an indication, when instance providers
have updated their resource information stores with changes, due
Status Change Indication Provider:
StatusChangeIndicationProvider
to Online Add/Delete (OL*) reconfigurations or due to any change
in resource status.
NOTE: The following apply to indication providers:
• The terms events and indications are used interchangeably.
• Although both EMS Wrapper provider and EVM CIM provider generate events related to
system hardware, the nature of events are different.
In addition, the support for CPUIndicationProvider and MemoryIndicationProvider has been added
with additional support for hardware events onHP Integrity BL860c i2, BL870c i2 &
BL890c i2 Server Blades, HP Integrity BL860c i4, BL870c i4, BL890c i4,
rx2800 i4 and rx2900 i4. The support for MemoryIndicationProvider has been added for
Legacy memory events and that for MemoryIndicationProviderIA for HP Integrity BL860c
i2, BL870c i2 & BL890c i2 Server Blades, HP Integrity Superdome 2, rx2800
i2, HP Integrity BL860c i4, BL870c i4, BL890c i4, rx2800 i4 and rx2900 i4
servers. For the listing of new events reported by SysFaultMgmt (System Fault Management)
(SFM) on these indication providers, see the SFM Event Descriptions.
CIMOM identifies SysFaultMgmt (System Fault Management) (SFM) providers using
SFMProviderModule. If a provider is not working properly, SFMProviderModule stops all
SysFaultMgmt (System Fault Management) (SFM) providers.
Table 4 Instance/Indication providers support
IA NGIS providers
2
IA legacy provider
1
PA-RISC provider
Instance/
Indication providers
√√√CPUProvider and
CPUStatusProvider
√√ХBladeProvider and
Supported only on HP
Integrity BL860c i2, BL870c
BladeStatusProvider
16 Introduction