HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

Table 3 Indication providers (continued)
DescriptionIndication provider
The following EMS Hardware Monitors are supported on HP
Integrity® servers running the HP-UX 11i v3 operating system:
• Corrected Platform Error Monitor (cpe_em)
• IPMI Forward Progress Log Monitor (fpl_em)
• CMC Monitor (cmc_em)
• Itanium Core Hardware Monitor(ia64_corehw)
• Itanium Memory Monitor (memory_ia64)
NOTE: This provider and WBEM to EMS Consumer is not
supported on HP Integrity BL860c i2, BL870c i2 & BL890c i2
Server Blades, HP Integrity rx2800 i2 server, HP Integrity
Superdome 2, HP Integrity BL860c i4, BL870c i4, BL890c i4,
rx2800 i4 and rx2900 i4.
For a list of EMS Event Descriptions, see:
http://www.hp.com/go/
hpux-diagnostics-online-events
The EVM CIM provider does the following:EVM CIM Provider:
EvmCimProvider
1. Converts hardware, software, and kernel events generated by
the EVM into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive EVM events generated on a
remote system. On the system on which SysFaultMgmt
(System Fault Management) (SFM) is installed, you can use an
SysFaultMgmt (System Fault Management) (SFM) tool, called
EVWEB, to view and administer events through the HP SMH
interface.
3. Logs messages logged by EVMCimProvider in
/var/opt/sfm/EvmCimProvider.log log file.
The SFMIndicationProvider generates indications that are compliant
with the WBEM standards. On HP Integrity systems, it replaces
the following EMS monitors:
SFM Indication Provider:
SFMIndicationProvider
• cmc_em
• cpe_em
• memory_ia64
• fpl_em
• ia64_corehw
On HP 9000 systems, it replaces the following EMS monitors:
• fpl_em
• ia64_corehw
On HP Superdome 2, the core analysis engine monitors core
hardware and generates events. DPR and PCI Error Recovery
events are generated on HP-UX . The following indication providers
generate the event respectively:
• CMC_IndicationProviderIA
• PCIeIndicationProvider
You can choose to use either the SFMIndicationProvider or the
EMS monitors that it replaces, to monitor your hardware. The
remaining EMS monitors continue to function as usual irrespective
of whether you choose the SFMIndicationProvider or the EMS
monitors that it replaces. If you choose the SFMIndicationProvider,
it does the following:
Components of SysFaultMgmt (System Fault Management) (SFM) 15