HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

Table 62 InternalHealthDaemon.cfg file configuration parameters (continued)
DescriptionRange value
Default
valueParameter
Advisory mode instructs user to execute a particular script to come
out of the erroneous state.
This tag is to enable or disable internal health daemon job.ENABLE,ENABLEHealthDaemonState
DISABLE
SFMConfig.xml
This is the main configuration file for SysFaultMgmt (System Fault Management) (SFM). It contains
tunable parameters for FPL Indication provider.
SysFaultMgmt (System Fault Management) (SFM) allows SFMConfig.xml being modified at
anytime and take effect immediately by executing the following command:
# /opt/sfm/bin/sfmconfig -c /var/opt/data/SFMConfig.xml
Table 63 (page 141) describes about the parameters to configure.
Table 63 FMLoggerConfig.xml file configuration parameters
DescriptionRange valueDefault valueParameter
This tag is for forwarding the event for envd actions.YES,
NO
YESForwardToEnvd
This tag enables the filtering of IPMI events, based on the
alert level.
FATAL,
CRITICAL,
INFORMATIONALFplLogAlertLevel
WARNING,
INFORMATIONAL,
MAJOR_FOR WARD_P R OGRE SS_L OG,
MINOR_FOR WARD_P R OGRE S S_LOG
This tag defines the filter condition, which needs to be applied
for alert level value, specified in FplLogAlertLevel.
EQUAL_TO,
NOT_EQUAL_TO,
GREATER_THANFplLogPassThroughCondition
LESS_THAN,
GREATER_THAN
This tag specifies if IPMI events, which are generated before
the system boot processed for generating WBEM events.
On, OffOffFPLPreBoot
By default this is disabled and pre-boot IPMI events are not
processed.
This tag enables the specification of IPMI events that should
be processed by over-riding the default rule of ignoring IPMI
events with severity, which is less than informational.
NANAE0Events
SFMConfig.xml 141