HP-UX SysFaultMgmt (System Fault Management) (SFM) Administrator Guide (762798-001, March 2014)

Table 2 Instance providers (continued)
DescriptionInstance provider
Consolidated Status provider provides the overall health status of various
subsystems of the managed node. The overall health status is consolidated
from the health status of individual status providers registered with WBEM.
Consolidated Status provider:
ConsolidatedStatusProvider
HealthStatusProvider
SysFaultMgmt (System Fault Management) (SFM) providers that contribute
to the overall health status are:
Blade
CPU
Memory
Environmental
Firmware Revision
Management Processor
Enclosure
Temperature Sensor
Retrieves properties such as serial number, part number, version,
manufacturer and FRU (field replaceable unit) name.
FRU (Field Replaceable Unit) Provider:
FRUProvider
Subscription configuration association provider is a provider which has
both instance and association types.
Subscription Configuration Association
Provider:
SubscriptionConfigAssociationProvider
Throttling configuration instance provider is currently not being supported.Throttling Configuration Instance Provider:
ThrottlingConfigInstanceProvider
Indication providers
SysFaultMgmt (System Fault Management) (SFM) includes four indication providers, the EMS
Wrapper provider, the Event Manager Common Information Model (EVM CIM) provider,
SFMIndicationProvider and MCA indication provider. Table 3 describes SysFaultMgmt (System
Fault Management) (SFM) indication providers.
Table 3 Indication providers
DescriptionIndication provider
The EMS Wrapper provider does the following:EMS (Event Monitoring Service) Wrapper Provider:
EMSWrapperProvider
1. Converts hardware events generated by the EMS Hardware
Monitors into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive Event Monitoring Service (EMS)
events generated on a remote system. On the system on which
SysFaultMgmt (System Fault Management) (SFM) is installed,
you can use an SysFaultMgmt (System Fault Management)
(SFM) tool, called EVWEB, to view and administer events
through the HP SMH interface.
The following EMS Hardware Monitors are supported on HP 9000
servers running the HP-UX 11i v3 operating system:
• LPMC (now CPU) (lpmc_em)
• Memory (dm_memory)
• Core HW (dm_core_hw)
• Chassis Code (dm_chassis)
• Integrity Core Hardware Monitor(ia64_corehw)
• IPMI Forward Progress Log Monitor (fpl_em)
14 Introduction