Administrator's and User's Guide for SFM HP-UX 11i v3 September 2010

Table 4-6 Default Monitoring Requests for Each Monitor (continued)
SysFaultMgmtSeverity Levels
Default Notification
Method
Not AvailableNoneE-MAIL
Available
(evweb eventviewer -L)
AllARCHIVE DB
NOTE: The Severity Levels in Table 4-6 indicate WBEM Severity.
For a list of WBEM indications generated by all the monitors, see the EMS Event Descriptions
at:
http://docs.hp.com/en/diag/sfm/sfm_summ.htm
Viewing Instances
To view information about processors, memory, cooling devices, power supplies, and disks,
complete the following steps:
1. On the System Page of HP SIM, click System Management Homepage, as shown in Figure
4–14.
Figure 4-14 System Page
The HP SMH home page is displayed.
2. Perform the relevant steps described in “Viewing Instances”.
Viewing Instances 45