Administrator's and User's Guide for SFM HP-UX 11i v3 March 2013
2 Installing the SFM software
This chapter discusses the following topics:
• “Prerequisites” (page 19)
• “Installing the SFM software from the media” (page 20)
• “Installing the SFM software from the web” (page 23)
• “Verifying the installation” (page 24)
• “Removing the SFM software” (page 26)
• “Verifying removal of the SFM software” (page 29)
Prerequisites
The SFM depot is available for download on the OE media and web. Starting from HP-UX 11i v3
September 2011 release, all the products namely ProviderSvcsBase, SysFaultMgmt, the I/O
Providers namely HP-UX WBEM RAIDSA Provider, HP-UX WBEM SAS Provider, HP-UX WBEM
Fibre-Channel Provider, HP-UX WBEM Direct Attached Storage Provider (DASProvider) must be
installed together to maintain compatibility among the diagnostic products.
On web:
September 2011 web release onwards, all the HP-UX 11i v3 version of WBEM
providers and Diagnostics products, are available for download on the WBEM
Management bundle for HP-UX 11i v3 bundle page at https://
h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?
productNumber=WBEMMgmtBundle.
NOTE: HP's WBEM Management bundle is released only on the web. All the
products from the WBEM Management bundle must be installed together. This is
due to product interdependency. These products might not work if they are installed
individually.
Following are the prerequisites for installing the March 2013 version of SFM software:
• HP-UX 11i v3 February 2007 release or later
• OpenSSL Version A.00.09.08g.001 or later
• EVM-EventMgr B.11.31 September 2007 or later
• SysMgmtBase Version B.00.02.03 (Interface) or later
• WBEMSvcs Version A.02.09.02.00 or later
• PHCO_40289 (for Itanium only)
• SysMgmtWeb (HP-UX Web-Based System Management User Interface) Version A.3.0.0.2,
September 2009 release or later
• HP Systems Insight Manager (HP SIM) Version C.06.01 or later
• ProviderSvcsBase Version C.07.00.07.01, March 2012 release or later
• SysMgmtPlus Version A.04.00, September 2010 release or later
• OnlineDiag Version B.11.31.06.xx on HP 9000 systems only, September 2009 release or
later
A.04.20.31EMS Version
D.06.00STM Version
Prerequisites 19