Administrator's and User's Guide for SFM HP-UX 11i v3 March 2013

NOTE: The following apply to indication providers:
• The terms events and indications are used interchangeably.
• Although both EMS Wrapper provider and EVM CIM provider generate events related to
system hardware, the nature of events are different.
In addition, the support for CPUIndicationProvider and MemoryIndicationProvider has been added
with additional support for hardware events on HP Integrity BL860c i2, BL870c i2 &
BL890c i2 Server Blades, HP Integrity BL860c i4, BL870c i4, BL890c i4,
and rx2800 i4. The support for MemoryIndicationProvider has been added for Legacy memory
events and that for MemoryIndicationProviderIA for HP Integrity BL860c i2, BL870c i2
& BL890c i2 Server Blades, HP Integrity Superdome 2, rx2800 i2, HP
Integrity BL860c i4, BL870c i4, BL890c i4, and rx2800 i4 servers. For the listing
of new events reported by SFM on these indication providers, see the SFM Event Descriptions.
CIMOM identifies the SFM providers using SFMProviderModule. If a provider is not working
properly, SFMProviderModule stops all the SFM providers.
Table 3 Instance / Indication providers support
IA NGIS providers
2
IA legacy provider
1
PA-RISC providerInstance / Indication providers
√√√CPUProvider and
CPUStatusProvider
√
Supported only on HP
Integrity BL860c i2, BL870c
√ХBladeProvider and
BladeStatusProvider
i2, BL890c i2, BL860c i4,
BL870c i4, and BL890c i4
ХХ√EMDProvider
√√√Environmental
√
Not supported on HP
Superdome 2
√√MemoryProvider and
MemoryStatusProvider
Supported only on HP
Integrity BL860c i2, BL870c
i2, BL890c i2, BL860c i4,
BL870c i4, BL890c i4,
rx2800 i2, and rx2800 i4
√
Supported only on HP
Integrity BL860c i2, BL870c
√ХEnclosureProvider and
EnclosureStatusProvider
i2, BL890c i2, BL860c i4,
BL870c i4, & BL890c i4
√√√MPProvider and MPStatusProvider
√√√CSChassisProvider
√√√RecordLogProvider
√
Not supported on HP
Superdome 2
√√FRUProvider
Х√√EMSWrapperProvider
√√ХEvmCimProvider
14 Introduction