Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 6-1 Troubleshooting Instance Providers (continued)
SolutionCauseProblem
To register the provider, complete the following
steps:
1. Enter the following command at the HP-UX
prompt:
# cimprovider -ls | grep
SFMProviderModule
2. If the following output is displayed, all the
providers are registered properly:
SFMProviderModule OK
3. If the output displayed is different from this
output, the provider module is not registered.
To register the provider module, enter the
following command at the HP-UX prompt:
# cimmof -nroot/PG_InterOp
/opt/sfm/schemas/mof/SFMProvidersR.mof
4. If no errors are displayed, the provider module
is registered successfully. Ignore this step and
move to step 6. If errors are displayed, restart
the CIMOM by entering the following command
at the HP-UX prompt:
# cimserver
5. After the CIMOM restarts, follow the process
from the step 1 mentioned above.
6. After the provider module is registered, create
a link between the SFM providers and the
CIMOM by entering the following command at
the HP-UX prompt:
On Itanium-based systems, enter:
# ln -s
/opt/sfm/lib/libsfmproviders.1\
/opt/wbem/providers/lib/libsfmproviders.so
On PA-RISC-based systems, enter:
# ln -s
/opt/sfm/lib/libsfmproviders.1\
/opt/wbem/providers/lib/libsfmproviders.sl
7. To check whether the link is created, enter the
following command at the /opt/wbem/
providers/lib directory:
# ls -l
Following is a sample output indicating that the
link is created:
On Itanium-based systems:
# lrwxr-xr-x 1 root sys 30 Jan 12
06:56 libsfmproviders.so ->
/opt/sfm/lib/libsfmproviders.1
On PA-RISC-based systems:
# lrwxr-xr-x 1 root sys 30 Jan 12
6:56 libsfmproviders.sl ->
/opt/sfm/lib/libsfmproviders.1
If the link is already present, the following error
message appears:
# ln:
/opt/wbem/providers/lib/libsfmproviders.sl
exists
Troubleshooting Instance Providers 85