Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 5-5 Trace Levels
DescriptionTrace Level
The system logs only those situations in Evweb that cause major failures.
Example: The database server is not functioning properly or is down.
1-Critical
The system logs those situations that generate an error.
Example: There is more than one subscription name. Evweb accepts only
one subscription name.
Critical situations are also logged at the Error trace level.
2-Error
The system logs situations that result in warning messages.
Example: A warning is generated when the default setting is modified.
Both critical and error situations are logged at the Warning trace level.
3-Warning
The system logs situations that result in information messages.
Example: An information message is generated when a non-administrator
attempts to perform a task that can be performed only by an
administrator.
Critical, error, and warning situations are logged at the Information trace
level.
4-Information
The default trace level is Warning. If you set tracing to a particular severity level, all messages
of that severity and above are logged in the log file.
The administrative commands for creating, modifying, and deleting subscriptions, and deleting
events are stored in the /var/sam/log/samlog.log file. From the GUI, you can access the
samlog.log file from HP SMH home page -> Logs -> Samlog.
NOTE: Tracing is available for administrators only.
Enabling Tracing Using the Evweb GUI
To enable tracing, complete the following steps:
1. Log in to the System Management Homepage.
To log in to HP SMH, enter http://<hostname>:2301 in the address bar of a Web
browser. The HP SMH login screen is displayed.
2. Enter your user name and password in the appropriate text boxes.
3. Click Sign In on the login screen.
The HP SMH home page is displayed.
4. Do one of the following:
• Select Tools -> Subscription Administration.
or
• Select Logs -> Event Viewer.
NOTE: The Enable Tracing option is not displayed if tracing is already enabled. Instead,
the Disable Tracing and the Modify Tracing options are displayed.
5. Select Enable Tracing available at the top right corner of the page.
The Enable tracing page is displayed.
6. Set the trace level by selecting the level from the trace level list.
72 Administering Indications and Instances Using HP SMH