Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

NOTE: Starting September 2009 release, in HP SMH GUI, you can refer to “The equivalent
command line” option, to view command line information about Partition Information. For more
information, view cprop manpage. See "man cprop"
Viewing Information About Blade
To obtain information about the Blade, such as the Onboard Administrator and HashID, complete
the following steps:
1. Select Blade under System on the HP SMH home page.
Information about the Blade is displayed.
2. To return to the HP SMH home page, click on Home.
NOTE: Starting September 2009 release, in HP SMH GUI, you can refer to “The equivalent
command line” option, to view command line information about blade. For more information,
view cprop manpage. See "man cprop"
Viewing Health Test report of Memory
NOTE: Health Test support is available when the feature is installed by ProviderSvcsBase. For
information on installing Health Test feature, see ProviderSvcsBase Release Notes
To obtain information about the Health Test for Memory, such as Component, Device, Test Name,
Test Description, Impact on System, Logging Level, and many more, complete the following
steps:
1. Select Memory under System on the HP SMH home page.
Information about the Memory is displayed.
2. Select Health Test tab on the Memory page to run a configured Health Test.
3. Select the option Basic Health Test to run basic test configured in the system.
4. Click Run to execute the Memory Health Test.
The Memory Health Test results are displayed in the View Health Test Results pane.
NOTE: Memory Health Test Results can also be viewed from the command line interface
(CLI).
5. To return to the HP SMH home page, click on Home.
For more information, see HP System Management Homepage Online Help. In HP SMH, go to
the Help menu.
Viewing Health Test report of Processors
NOTE: Health Test support is available when the feature is installed by ProviderSvcsBase. For
information on installing Health Test feature, see ProviderSvcsBase Release Notes
To obtain information about the Health Test for Processor/CPU, such as Component, Device,
Test Name, Test Description, Impact on System, Logging Level, and many more, complete the
following steps:
1. Select Processors under System on the HP SMH home page.
Information about the Processors is displayed.
2. Select Health Test tab on the Processors page to run a configured Health Test.
52 Administering Indications and Instances Using HP SMH