Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 4-4 Command Representation
In SFMIn monconfig (Online Diagnostics)Task
# evweb subscribe -D -f -n
<subscription name>
# /etc/opt/resmon/lbin/monconfig
Enter D at the main menu selection prompt.
Deleting a
monitoring request
# sfmconfig -t -<valid monitor
name>
#
/etc/opt/resmon/lbin/send_test_event
<monitor name>
Sending a test event
# sfmconfig -a -l -t <device name>
-d <device id>
# set_fixed -n <resource name>
Changing the status
of a device to UP.
# evweb eventviewer -E -n
<EvArchNo>
# resdata -r <resource name> -R
<request id> -a|-m|-u [-n <notify
id>] [-h <host name>] -M <monitor
key>]
Viewing details of
an event
Table 4-5 displays the default event destinations for Online Diagnostics.
Table 4-5 Default Monitoring Requests for Each Monitor
Online DiagnosticsSeverity LevelsDefault Notification Method
textlog: /var/opt/resmon/log/event.log
AllTextlog
Available
MAJOR WARNING
SERIOUS
CRITICAL
Syslog
E-MAIL address: rootMAJOR WARNING
SERIOUS
CRITICAL
E-MAIL
Available
(evweb eventviewer -L)
AllARCHIVE DB
NOTE: The Severity Levels in Table 4-5 indicate EMS Severity.
Table 4-6 displays the default event destinations for SysFaultMgmt.
Table 4-6 Default Monitoring Requests for Each Monitor
SysFaultMgmtSeverity Levels
Default Notification
Method
textlog: /var/opt/sfm/log/event.log
AllTextlog
Available
CRITICAL
FATAL/NON-RECOVERABLE
Syslog
Not AvailableNoneE-MAIL
Available
(evweb eventviewer -L)
AllARCHIVE DB
NOTE: The Severity Levels in Table 4-6 indicate WBEM Severity.
For a list of WBEM indications generated by all the monitors, see the EMS Event Descriptions
at:
44 Administering Indications and Instances Using HP SIM