Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 4-1 EMS, WBEM and Evweb Events Severity values (continued)
Evweb SeverityWBEM SeverityEMS Severity
7 Critical6 Critical4 Serious
7 Critical7 Fatal/Non-recoverable5 Critical
NOTE: Perceived Severities in Syslog is same as WBEM severities.
In the SFM mode although the SFMIndicationProvider is generating the events, the name of the
provider displayed in the event details is one of the following mentioned under Provider in Table
4–2, depending on the device to which the event is related. Table 4-3 maps the EMS Hardware
Monitors and the corresponding WBEM providers.
Table 4-2 Representation of Monitors
Both IA and PA-RISCPA-RISC ProviderIA ProviderMonitor
CMC_IndicationProviderIAcmc_em
CPE_IndicationProviderIAcpe_em
CoreHardwareIndicationProviderdm_core_hw
ChassisIndicationProviderdm_chassis
DiskIndicationProviderdisk_em
FPL_IndicationProviderfpl_em
SEL02_IndicationProvideria64_corehw
LPMC_IndicationProviderlpmc_em
MemoryIndicationProvidermemory_ia64
Table 4-3 compares the EMS Hardware Monitors properties with the equivalent EMS Wrapper
Provider / Native Indication Provider properties.
Table 4-3 Property Representation
EMS Wrapper Provider / Native Indication ProviderEMS Hardware Monitors
EventTimeEvent Time
PerceivedSeveritySeverity
EventIDEvent
SystemNameSystem
SummarySummary
DescriptionDescription of Error
ProbableCauseDescription and
RecommendedAction (these two are separate fields)
Probable Cause/ Recommended Action
SystemSerialNumberSystem Serial Number
HWManufacturerInquiryVendorID
HWLogicalLocationPhysical Device Path
DeviceModelInquiryProductID
DeviceControllerLogicalLocationPhysicalDevicePath
Creating Subscriptions and Viewing Indications Using HP SIM 43