Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

NOTE: You can also send test events for other devices that the SFMIndicationProvider monitors.
For information on the devices monitored by the SFMIndicationProvider, see Table 1-2 (page 14).
To view the list of events, enter the following command at the HP-UX prompt:
# evweb eventviewer -L
A list of events along with the details such as event number, severity, and event category are
displayed.
To view the details of an event, enter the following command at the HP-UX prompt:
# evweb eventviewer -E -n <event number>
The details of the specified event such as the summary, description, probable cause, and
recommended actions for the error are displayed.
For event information on event.log, enter the following command:
/var/opt/sfm/log/event.log
For all events, and for severities logged to syslog, see Table 4-1 (page 42).
To switch back from the from the SFM monitoring mode to the EMS monitoring mode, enter the
following command at the HP-UX prompt:
# /opt/sfm/bin/sfmconfig -w -e
Configuring the monitoring mode 33