Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 1-2 Indication Providers
DescriptionIndication Provider
The EMS Wrapper Provider does the following:
1. Converts hardware events generated by the EMS Hardware
Monitors into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive Event Monitoring Service (EMS)
events generated on a remote system. On the system on which
SFM is installed, you can use an SFM tool, called EVWEB, to
view and administer events through the HP SMH interface.
The following EMS Hardware Monitors are supported on HP
9000 servers running the HP-UX 11i v3 operating system:
• LPMC (now CPU) (lpmc_em)
• Memory (dm_memory)
• Core HW (dm_core_hw)
• Chassis Code (dm_chassis)
• Integrity Core Hardware Monitor(ia64_corehw)
• IPMI Forward Progress Log Monitor (fpl_em)
The following EMS Hardware Monitors are supported on HP
Integrity® servers running the HP-UX 11i v3 operating system:
• Corrected Platform Error Monitor (cpe_em)
• IPMI Forward Progress Log Monitor (fpl_em)
• CMC Monitor (cmc_em)
• Itanium Core Hardware Monitor(ia64_corehw)
• Itanium Memory Monitor (memory_ia64)
NOTE: This provider and WBEM to EMS Consumer is not
supported on HP Integrity BL860c i2, BL870c i2 & BL890c i2
Server Blades.
For a list of EMS Event Descriptions, see:
http://docs.hp.com/en/diag/ems/eme_summ.htm
EMS Wrapper Provider
The EVM CIM Provider does the following:
1. Converts hardware, software, and kernel events generated
by the EVM into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive EVM events generated on a
remote system. On the system on which SFM is installed, you
can use an SFM tool, called EVWEB, to view and administer
events through the HP SMH interface.
EVM CIM Provider
14 Introduction