Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table 1-1 Instance Providers
DescriptionInstance Provider
The Blade Instance Provider retrieves the following information:
• Blade ID
• Blade Physical location
• Blade Hardware path
• Blade Serial number
• Blade Part number
• Blade Status
NOTE: The Blade Instance Provider is available on BL860c / BL870c HP
Server
Blade
The CPU Instance Provider gathers the following types of information:
• Logical processor information, such as:
— Current clock speed
— Processor family
— Processor status information, including configuration and
deconfiguration, failure status, and active and inactive status
— Load percentage
• Physical processor chip information, such as chip revisions and
architecture revisions
• Location details, such as:
— Location attributes such as cabinet number, cell number, slot number,
and so on. Only information for filled slots is available.
— Processor IDs
The CPU Instance Provider depends on the EMS Wrapper Provider to
update the processor inventory.
CPU
The Memory Instance Provider gathers the following types of information:
• Memory slot information
• Memory module information, such as:
— Serial number
— Part number
— Memory capacity
— Module form factor
— Module status (for example, configuration status, failure status)
The Memory Instance Provider depends on the EMS Wrapper Provider
to update the memory inventory.
Memory
The Environmental Instance Provider gathers information about the
following hardware components:
• Fans
• Power supply
• Bulk power supply
• AC input lines
Environmental
The FMD Instance Provider does the following:
• Provides the ability to predefine a filter in a repository
• Ensures that chosen indications are logged to the Event Archive
• Creates HP-advised subscriptions when SFM is installed
Filter Metadata (FMD)
The Firmware Revision Provider retrieves the following types of
information:
• System firmware revision
• Management Processor (MP) firmware revision
Firmware Revision
12 Introduction