Administrator's and User's Guide for SFM HP-UX 11i v3 April 2010

Table A-1 EMT Message File Description (continued)
UsageDescriptionTag
Cause_Action={(CauseID=1,
ActionID={1,2}), (CauseID=2, ActionID=3),
(CauseID=3, ActionID={2,3})}
Used to associate a cause with an action for
a specific error message. The Cause_Action
tag is mandatory if there is more than one
cause and at least one corrective action for
a given error message. However, if there is
only one cause and one or more corrective
action for a given error message, the Action
tags are associated with the Cause tag. In
such a situation, the Cause_Action tag is
not mandatory. For any error, a cause can
be specified without specifying the
corrective action. However, a corrective
action cannot be specified without
specifying a cause.
Cause_Action
WBEMDetail EventID=123, AlertType=1,
ProbableCause=7,
EventCategory=21,OtherAlertType=”My own alert
type”OtherSeverity=”My own
Severity”OtherEventCategory=”My own category”
Specify WBEM specific details of a message.
The WBEMDetail tag is mandatory if one
of the subsystems specified in the Header
is of type WBEM. The WBEMDetail tag has
the following attributes:
• EventID – This ID must be unique
within a WBEM Provider.
• AlertType – The value ranges from 1 to
8.
• ProbableCause – The value ranges from
0 to130.
• EventCategory – The value ranges from
0 to 46.
• OtherSeverity – Required only if
Severity = 1, else it can be omitted.
• OtherAlertType – Required only if
AlertType = 1, else it can be omitted.
• OtherEventCategory – Required only if
EventCategory = 1, else it can be
omitted.
WBEMDetail
Monitordetail EventNumber=123
Specify the details of a message pertaining
to EMS Monitor. The MonitorDetail tag is
mandatory if one of the subsystems
specified in the Header is of type
MonitorDetail. For error messages that are
generated by EMS Monitors or the EMS
framework, the MonitorDetail tag must not
be used.
MonitorDetail
EVMDetail
EVMName=sys.unix.filesystem
Specify the details of a message pertaining
to EVM. The EVMDetail tag is mandatory
if one of the subsystems specified in the
Header is of type EVM.
EVMDetail
NETTLDetail
ErrorID=7,Severity=Information
Specify the details of a message pertaining
to NETTL. The NETTLDetail tag is
mandatory if one of the subsystems
specified in the Header is of type NETTL.
NETTLDetail
107