Administrator's and User's Guide for SFM HP-UX 11i v2 March and June 2008

Table A-7 describes the fields and enables you to interpret the values displayed in Figure A-7.
Table A-7 Description of the Disk Drive Fields and Values
DescriptionFields and Values
Indicates whether the disk drives are functioning properly or not. In Figure A-7, there are
two disks and the status of both the disks is OK. If the status of a disk indicates an error, see
the details of the error using Event Viewer.
Status
Indicates the physical location of the disks.Hardware Path
Indicates the product ID of the disks.Product ID
Indicates the vendor ID of the disks.Vendor ID
Indicates the serial number of the disks.Serial Number
Indicates the capacity of the disks in megabytes.Capacity
Indicates the firmware revision of the disks.Disk Firmware
Revision
Management Processor Instances
This section describes the Management Processor (MP) instances. Figure A-8 is a sample MP
property page.
Table A-8 describes the fields and enables you to interpret the values displayed in Figure A-8.
Management Processor Instances 93