Administrator's and User's Guide for SFM HP-UX 11i v2 March and June 2008
To check the status of the SFM provider module, enter the following command at the HP-UX
prompt:
# cimprovider -ls | grep SFMProviderModule
If the SFM provider module is disabled, enter the following command at the HP-UX prompt to
enable the Event Archive Consumer:
# /opt/wbem/bin/cimprovider -e -m SFMProviderModule
If the Event Archive Consumer is enabled and the indications are still not logged in the Event
Archive, check for error logs in the /var/opt/sfm/log/sfm.log file. For further assistance,
contact the HP support center.
Problem
WBEM Indications are not mailed to your email address.
Cause
The SFM provider module is disabled.
Solution
Enable the SFM provider module.
To enable the SFM provider module, enter the following command at the HP-UX prompt:
# cimprovider -ls | grep SFMProviderModule
If the SFM provider module is enabled, and the indications are not logged in the Event Archive,
check for error logs in the /var/opt/sfm/log/sfm.log file. For further assistance, contact
the HP support center.
NOTE: For you to enable or disable the Event Archive Consumer and the Email Consumer,
the CIM server must be running. Evweb does not log events when the Event Archive Consumer
or the Email Consumer is disabled.
Problem
The response time for a command used to view indications from the Event Archive is long.
Cause
The locale on your system is set to a language other than English.
Solution
To improve performance of the Event Viewer, set the locale to English.
86 Troubleshooting SFM