Administrator's and User's Guide for SFM HP-UX 11i v2 March and June 2008

The Logfile, which includes details about the installation, is displayed. If there are no
errors in the Logfile, the SFM software is installed properly. If the SFM software is not
installed properly, you must repeat the installation procedure.
3. For information about errors related to installation, enter the following command at the
HP-UX prompt:
# swjob -a log <jobid> @ <system name>:/
The jobid is available in the Logfile, as underlined in the Logfile window, in the following
figure:
For example, enter the following command at the HP-UX prompt:
# swjob -a log iemlhamia-0013 @ iemlhamia.india.hp.com:/
Verifying the Installation Using the CLI
To verify your installation using the CLI, complete the following steps:
1. Log in to the system as a superuser.
2. Enter the following command at the HP-UX prompt:
# swjob
24 Installing the SFM Software