Administrator's and User's Guide for SFM HP-UX 11i v2 March and June 2008

2 Installing the SFM Software
The System Fault Management (SFM) software is installed by default with the HP-UX 11i v2
Operating Environment (OE) media. However, at some point you may need to install the SFM
software separately. This chapter describes how to install the SFM software as a standalone
component on the HP-UX 11i v2 operating system.
This chapter discusses the following topics:
• “Prerequisites” (page 19)
• “Installing the SFM Software from the Media” (page 20)
• “Installing the SFM Software from the Web” (page 23)
• “Verifying the Installation” (page 23)
• “Removing the SFM Software” (page 25)
• “Verifying Removal of the SFM Software” (page 29)
Prerequisites
Following are the prerequisites for installing the March 2008 version of SFM software:
• May 2005 HP-UX 11i v2 Operating Environment Update Release (OEUR) or later
• QPKBASE B.11.23.0712.070a Base Quality Pack Bundle for HP-UX 11i v2
• OpenSSL Version A.00.09.07e.013 or later
• SysMgmtWeb Version A.2.2.7 (HP-UX Web-Based System Management User Interface)
• WBEMServices A.02.05.08 WBEM Services CORE Product
• OnlineDiag version B.11.23.10.xx
Prerequisites 19