Administrator's and User's Guide for SFM HP-UX 11i v2 December 2008

Table 4-4 Command Representation (continued)

In SFMIn monconfig (Online Diagnostics)Task

# Evweb subscribe -D -f -n

# /etc/opt/resmon/lbin/monconfig

Enter D at the main menu selection prompt.

Deleting a monitoring

request

# sfmconfig -t -<valid monitor

name>

/etc/opt/resmon/lbin/send_test_event

Sending a test event

# sfmconfig -a -l -t <device

name> -d <device id>

# set_fixed -n <resource name>

Using the set_fixed utility

to change the status of a

device to UP.

# Evweb eventviewer -E -n

# resdata -r <resource name> -R

<request id> -a|-m|-u [-n

<notify id>] [-h <host name>] -M

<monitor key>]

Viewing details of an

event

Viewing Instances

To view information about processors, physical memory, cooling devices, power supplies, and

disks, complete the following steps:

1. On the System Page, select System Management Homepage, as shown in Figure 4–14.

Figure 4-14 System Page

The HP SMH home page is displayed.

2. Perform the relevant steps described in “Viewing Instances” (page 47).

46 Administering Indications and Instances Using HP SIM