Administrator's and User's Guide for SFM HP-UX 11i v1 December 2006

Solution

Enter the following command at the HP-UX prompt:

# cimprovider -ls | grep SFMProviderModule

If the following output is displayed, all the providers are registered properly:

SFMProviderModule OK

If the output displayed is different from this output, the provider module is not registered. To

# cimmof -nroot/PG-InterOp /opt/sfm/schemas/mof/SFMProvidersR.mof

If no errors are displayed, the provider module is registered successfully. If errors are displayed,

restart the CIMOM by entering the following command at the HP-UX prompt:

# cimserver

After the CIMOM restarts, enter the following command at the HP-UX prompt to register the

provider module:

# cimmof -nroot/PG-InterOp /opt/sfm/schemas/mof/SFMProvidersR.mof

After the provider module is registered, create a link between the SFM providers and the CIMOM

by entering the following command at the HP-UX prompt:

# ln -s /opt/sfm/lib/libsfmproviders.1

/opt/wbem/providers/lib/libsfmproviders.sl

To check whether the link is created, enter the following command at the /opt/wbem/providers/lib

directory:

# ls

Following is a sample output indicating that the link is created:

# lrwxr-xr-x 1 root sys 30 Jan 12 6:56 libsfmproviders.sl ->

/opt/sfm/lib/libsfmproviders.1

If the link is already present, the following error message appears:

# ln: /opt/wbem/providers/lib/libsfmproviders.sl exists

Problem

First request on systems does not return with required information immediately.

Cause

Requested information is being collected. The following message is displayed:

Inventory is being built currently. Please try after some time.

Solution

Wait a while, then request for the information again. Providers respond with requested

information when information has been gathered.

Problem

Indications fulfilling the conditions defined in the HP-Known HP-Defined filters, are not logged

in the Event Archive.

Cause

The HP-Known filters and HP-Known subscriptions have been deleted from the CIMOM.

Solution

Create the following EnumerateInstances.xml file and save it in any location:

EnumerateInstances.xml ->

<?xml version="1.0" encoding="utf-8"?>

68 Troubleshooting SFM