Administrator's and User's Guide for SFM HP-UX 11i v1 December 2006

3. Select Voltage on the system page.
The voltage status of the system is displayed in the Voltage Status window.
4. To return to the System Management Homepage Home window, select Home at the top of
the window.
NOTE: There is no CLI to view information about the voltage status.
For more information, see the HP Systems Insight Manager Installation and User’s Guide at:
http://docs.hp.com/en/netsys.html
Viewing Information About Firmware Revision
To view information about the Firmware Revision about the system, complete the following
steps:
1. On the System Page, select System Management Homepage, as shown in Figure 3-14
(page 40).
2. Select Firmware Revision under Software.
Information such as the MP firmware revision and system firmware revision is displayed.
3. To return to the System Management Homepage Home window, select Home at the top of
the window.
NOTE: There is no CLI to view information about the voltage status.
For more information, see the HP Systems Insight Manager Installation and User’s Guide at:
http://docs.hp.com/en/netsys.html
Viewing Instances 43