Administrator's and User's Guide for SFM HP-UX 11i v1 December 2006

Table 3-2 compares the EMS Hardware Monitors properties with the equivalent EMS Wrapper

Provider properties.

Table 3-2 Property Representation

EMS Wrapper ProviderEMS Hardware Monitors

EventTimeEvent Time

PerceivedSeveritySeverity

EventIDEvent

SystemNameSystem

SummarySummary

DescriptionDescription of Error

ProbableCauseDescription and

RecommendedAction (these two are separate fields)

Probable Cause/ Recommended Action

SystemSerialNumberSystem Serial Number

HWManufacturerInquiryVendorID

HWLogicalLocationPhysical Device Path

DeviceModelInquiryProductID

DeviceControllerLogicalLocationPhysicalDevicePath

For more information, see the HP Systems Insight Manager Installation and User’s Guide at:

http://docs.hp.com/en/netsys.html

Viewing Instances

This section describes the tasks you must perform to view instances. This section discusses the

following topics:

• “Viewing Information About Processors” (page 39)

• “Viewing Information About Disks” (page 40)

• “Viewing Information About Memory” (page 41)

• “Viewing Management Processor Status” (page 41)

• “Viewing Information About Cooling Devices” (page 41)

• “Viewing Information About Power Supplies” (page 42)

• “Viewing Temperature Status” (page 42)

• “Viewing Voltage Status” (page 42)

• “Viewing Information About Firmware Revision” (page 43)

NOTE: The version numbers of the products shown in the figures may be different from the

version you are installing.

Viewing Information About Processors

To obtain information about processors using the CPU Instance Provider, complete the following

steps:

Viewing Instances 39