HP-UX System Administrator's Guide: Routine Management Tasks

Table 2-2 SpeedyBoot Tests (continued)
DescriptionValuesTest Name
When on, enables full destructive memory tests. When off, do
not perform full destructive memory tests. Supported only on HP
Integrity Servers.
on
off
Memory_init
IO hardware tests. When on, enables system firmware (or EFI
drivers) to perform all the tests of IO hardware (for boot devices
only). When off, do not perform these tests. Supported only on
HP Integrity Servers.
on
off
IO_HW
When on, enables chipset tests. When off, do not perform chipset
tests. Supported only on HP Integrity Servers.
on
off
Chipset
Viewing your System’s SpeedyBoot Settings
If your system is currently booted, you can display the SpeedyBoot settings using the
-v option to the setboot command:
Booting Systems 73