HP-UX System Administrator's Guide: Configuration Management

Beginning with HP-UX 11i v3, file systems are “shared” with other systems with the
share command. Shared file system information is stored in the /etc/dfs/dfstab
file. For conversion information, see the HP-UX 11i Version 3 Release Notes.
Enabling and Disabling the NFS Server and Client
The following procedures describe how to enable or disable the NFS server and client.
Enable or Disable the NFS Server with Text-Based HP SMH
1. Log in to the server as superuser.
2. Start HP SMH; see “Starting Text-Based HP SMH” (page 30).
3. Navigate to Network Services.
a. Press n, Networking and Communications
b. Press s, Network Services Configuration
c. Press k, Network Services
4. Highlight NFS Server.
5. Press Tab A to pull down the Actions menu.
6. Select one of:
Disable To stop the NFS server.
Enable To start the NFS server.
Restart To restart the NFS server.
Enable or Disable the NFS Client with Text-Based HP SMH
1. Log in to the client as superuser.
2. Start HP SMH; see “Starting Text-Based HP SMH” (page 30).
3. Navigate to Network Services.
a. Press n, Networking and Communications
b. Press s, Network Services Configuration
c. Press k, Network Services
4. Highlight NFS Client.
5. Press Tab A to pull down the Actions menu.
6. Select one of:
Disable To stop the NFS client.
Enable To start the NFS client.
Restart To restart the NFS client.
76 Configuring Networking