HP System Management Homepage Version 3.2.3 Release Notes (466303-409; April 2012)
2 Defect fixes in this version
HP SMH 3.2.1 release for HP-UX 11.23
The following issue is fixed in this release:
Table 2 HP-UX April 2012 (WEB1204) fixes
DescriptionDefect ID
During the configure phase of SysMgmtWeb A.3.2.0, genproxycerts script loops until the
/var/opt/hpsmh/cert.log is filled when LANG is set to native language.
QXCR1001157294
This release also includes fixes for internally found issues.
HP SMH 3.2.3 release for HP-UX 11.31
Internally found defects are fixed in this release.
HP SMH WebApps for HP-UX 11.31
The following issues are fixed in the HP SMH WebApps for HP-UX 11i v3 March 2012 (AR1203)
release.
Table 3 HP-UX March 2012 (AR1203) fixes
DescriptionDefect ID
Kernel Configuration (kcweb) Version B.11.31.10
kcusage reports more than 100% usage for filecache_max kernel parameter. This
defect is fixed.
QXCR1001020860
kcmond uses 100% of a CPU. This defect is fixed.QXCR1001175801
kcalarm(1M) computes present value for ninode without counting vx_ninode. This
defect is fixed.
QXCR1001174263
Disks & Files Systems (fsweb) Version B.11.31.15
Cluster VG is distributed with the wrong minor number for Serviceguard. This defect is
fixed.
N/A
Network Interfaces Configuration and Network Services Configuration (ncweb) Version B.11.31.13
SMH can hang when adding default route. If the default route being added is required to
perform an nslookup, the nslookup command hangs, causing the task to hang. Also,
QXCR1001138965
when adding a default route using the SMH TUI, if you specify a long hostname, the output
of the netstat –r command might have the "Destination" and "Gateway" on separate
lines, as a result the add route task will hang. This defect is fixed.
An attempt to set TRYAGAIN=continue for ipnodes in /etc/nsswitch.conf, does
not work and SAM always goes back to the defaults. This defect is fixed.
QXCR1001169617
SAM cannot set default hosts: database in nsswitch.conf file. This defect is fixed.QXCR1001169638
When using smh(1M) A.3.2.2 to add an IPv6 route, the string value added in
/etc/rc.config.d/netconf-ipv6 for IPV6_DESTINATION must be within double
QXCR1001171786
quotation marks, to avoid an error during execution of /sbin/init.d/net-ipv6
start. This defect is fixed.
When using SMH, modifying and removing the IPv6 network route displays an error no
such route and the network route is not changed. This defect is fixed.
QXCR1001171051
SysMgmtBASE Version B.00.02.04.10
HP SMH 3.2.1 release for HP-UX 11.23 9