HP System Management Homepage Version 3.2.3 Release Notes (466303-408; March 2012)
Table Of Contents
- HP System Management Homepage Release Notes
- Contents
- 1 Features
- 2 Defect fixes in this version
- 3 Issues and workarounds
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- March 2012 release for HP-UX
- February 2012 release for Linux and Windows
- April 2011 release for Linux and Windows
- March 2011 release for HP-UX
- December 2010 release for HP-UX
- September 2010 release for Linux and Windows
- September 2010 release for HP-UX
- March 2010 release for Linux and Windows
- March 2010 release for HP-UX
- November 2009 release for Linux and Windows
- October 2009 release for HP-UX
- September 2009 release for HP-UX
- March 2009 release for HP-UX
- January 2009 release for Linux and Windows
- Security bulletin and alert policy for non-HP owned software components
- Related information
- Typographic conventions
- Index
2 Defect fixes in this version
HP SMH 3.2.3 release for HP-UX 11.31
Internally found defects are fixed in this release.
HP SMH WebApps for HP-UX 11.31
The following issues are fixed in the HP SMH WebApps for HP-UX 11i v3 March 2012 (AR1203)
release.
Table 2 HP-UX March 2012 (AR1203) fixes
DescriptionDefect ID
Kernel Configuration (kcweb) Version B.11.31.10
kcusage reports more than 100% usage for filecache_max kernel parameter. This
defect is fixed.
QXCR1001020860
kcmond uses 100% of a CPU. This defect is fixed.QXCR1001175801
kcalarm(1M) computes present value for ninode without counting vx_ninode. This
defect is fixed.
QXCR1001174263
Disks & Files Systems (fsweb) Version B.11.31.15
Cluster VG is distributed with the wrong minor number for Serviceguard. This defect is
fixed.
N/A
Network Interfaces Configuration and Network Services Configuration (ncweb) Version B.11.31.13
SMH can hang when adding default route. If the default route being added is required to
perform an nslookup, the nslookup command hangs, causing the task to hang. Also,
QXCR1001138965
when adding a default route using the SMH TUI, if you specify a long hostname, the output
of the netstat –r command might have the "Destination" and "Gateway" on separate
lines, as a result the add route task will hang. This defect is fixed.
An attempt to set TRYAGAIN=continue for ipnodes in /etc/nsswitch.conf, does
not work and SAM always goes back to the defaults. This defect is fixed.
QXCR1001169617
SAM cannot set default hosts: database in nsswitch.conf file. This defect is fixed.QXCR1001169638
When using smh(1M) A.3.2.2 to add an IPv6 route, the string value added in
/etc/rc.config.d/netconf-ipv6 for IPV6_DESTINATION must be within double
QXCR1001171786
quotation marks, to avoid an error during execution of /sbin/init.d/net-ipv6
start. This defect is fixed.
When using SMH, modifying and removing the IPv6 network route displays an error no
such route and the network route is not changed. This defect is fixed.
QXCR1001171051
SysMgmtBASE Version B.00.02.04.10
On HP9000 (PA-RISC) systems when HP SMH is launched in TUI mode, an attempt to
access ugweb plug-in results in TUI crash. This defect is fixed.
N/A
HP-UX Auditing and Security Attributes Configuration (secweb) Version B.11.31.09
secweb.cgis crashes with SIGSEGV when deleting custom event. This defect is fixed.QXCR1001003553
Partition Manager (parmgr) Version B.31.02.04.06
Partition Manager installation fails if Java 1.5 is not available. This defect is fixed.QXCR1001172216
HP SMH 3.2.3 release for HP-UX 11.31 9