HP System Management Homepage Version 3.2.2 User Guide (509679-005; March 2011)

NOTE: When you enter the IP address or the IP address range, ensure that your system IP is not in
the restricted IP range.
5. Select the Restrict or Permit radio button.
6. Click Add to add the configurations.
7. Click Apply to apply the configurations.
To remove IP addresses from the list:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the IP Restricted Login link.
4. Select the check box beside the IP addresses you want to remove.
5. Click Remove.
6. Click Apply to apply the configurations.
Local Server Certificate category
The Local Server Certificate link enables you to use certificates that are not generated by HP.
741
Alternative Names
Valid server name list.
Create
Create the certificate request.
Organization (O)
The name of the organization.
2 85
Organizational Unit (OU).
The name of the unit within the
organization requesting the
certificate.
Create
Re-create the certificate adding the
given alternative names.
PKCS #7 Information
PKCS #7 fields filled.
6
Import
Import the signed certificate.
3
Alternative Name
If you use the following process, the self-signed certificate that was generated by the HP SMH is replaced
with one issued by a certificate authority (CA).
• The first step of the process is to cause the HP SMH to create a Certificate Request (PKCS #10). This
request uses the original private key associated with the self-signed certificate and generates data for
the certificate request. The private key never leaves the server during this process.
• After the Public Key Infrastructure PKCS #10 data is created, the next step is to send it to a certificate
authority. Follow your company policies for sending secure requests for and receiving secure certificates.
System Management Homepage box 37