SysMgmtPlus Release Notes, September 2011

Defect Fixes
• QXCR1001090146
Extra tabs displayed with multi blade system.
Problem: Some extra tabs are getting displayed with multi blade system in memory info.
Resolution: This problem is fixed.
• QXCR1001095052
what string output is not set on the libs of proplus.
Problem: what string output is not set for the libs of proplus.
Resolution: This problem is fixed.
• QXCR1001113964
what string output is not set for cprop
Problem: what string output is not set for cprop.
Resolution: This problem is fixed.
• QXCR1001114312
The memory page on HP Superdome 2 on HP SMH displays memory info in KB.
Problem: The memory page on HP Superdome 2 systems on HP SMH displays memory info
in KB. The memory info should be in GB.
Resolution: This problem is fixed.
Known Problems and Workaround
If SysMgmtPlus is installed independently after installing HP SMH, HP SMH must be restarted. (HP
SMH will restart automatically after terminating, and it will terminate automatically if no SMH
connections are present for a period of time (default 30 minutes)).
To stop HP SMH, enter the following commands at the HP-UX prompt:
# /opt/hpsmh/lbin/hpsmh stop
To start HP SMH, enter the following commands at the HP-UX prompt:
# /opt/hpsmh/lbin/hpsmh autostart or just access SMH from browser & it will automatically
restart.
Product Documentation
For the latest information on SysMgmtPlus, see
http://www.hp.com/go/hpux-diagnostics-sysmgmtplus-docs
For information on HP SMH, see
http://www.hp.com/go/smh-docs
Product Structure
Following are the commands you must use to obtain the bundle, product, sub-product, and the
fileset information about the SysMgmtPlus depot:
• Bundle
$ swlist -s <SysMgmtPlus Depot Location>
# SysMgmtPlus A.06.00.04.01 HP-UX SMH Supplemental Functionality
SysMgmtPlus.PropPlus A.06.00.04 HP-UX Property Page Plus
# SysMgmtPlus A.05.00.08.01 HP-UX SMH Supplemental Functionality
SysMgmtPlus.PropPlus A.05.00.08 HP-UX Property Page Plus
• Product(s)
2 Contents