Software Package Builder release notes HP-UX 11i v1, HP-UX 11i v2, and HP-UX 11i v3

Performance
• When adding a pre-existing element to a corequisite (or prerequisite) OR Relation Set, the
icon should change from yellow to green but fails to do so. Both of the icons remain yellow.
The icons correctly change to green upon exiting the dialog and the elements are then
displayed in the the main window.
• Java Swing behavior may cause navigational inconsistencies when running SPB. These
inconsistencies can potentially lead to data loss.
— Mouse click behavior setting is too slow and causes SPB to not buffer all mouse clicks.
This compatibility issue is corrected by performing the following procedure and should
be completed prior to using SPB:
1. Open the X Client Manager window.
2. From the Menu Bar, select Settings > Mouse.
3. Check which setting is selected for Middle button emulation.
◦ If this option is set to Disabled, you do not need to complete
Or
◦ If this option is set to Left Button + Right Button, proceed to Step 4.
4. In the section titled, Middle button detection speed, adjust the slider bar
to the far right, Fast setting.
5. Click Apply and exit.
— Attribute Table Navigation
The tab key does not function properly when used to navigate between fields in the
Attribute Table. No fix is available as of release time.
• Long delays may occur when opening the Manage Fileset Content dialog box if your
source directory contains symbolic links. The delay can take up to 30 seconds. No fix is
available as of release time.
Additional troubleshooting topics are located in the SPB online help system.
Defect Reporting
Use CHART to report defects in STM. The project name is hpux.spb. If you don't have access
to CHART, contact an HP representative to enter a defect for you.
Performance 9