Software Package Builder 3.0 User's Guide
5QHVYCTG2CEMCIKPI
5QHVYCTG2CEMCIKPI.KHGE[ENG
Chapter 222
3. Create a Product Specification File (PSF) - Use SPB to create a
PSF to define the software package. SPB provides a GUI for creating
the PSF.
4. Validate the PSF - Determine that the PSF is valid prior to
creating the software package. SPB uses a packaging policy rules file
to validate the PSF.
5. Create the software package - Use the SD-UX swpackage
command to create your software package. This can be done from the
SPB GUI or the command line.
6. Install the software package - Use the SD-UX swinstall
command to install the contents of your software package.
7. Produce distribution media - Determine the appropriate method
of distribution.You can use the SD-UX swcopy command to create
copies of the package.
8. Test the installation - Test the installation of the software package
using the SD-UX swverify command.
TIP For detailed information on SD-UX commands, refer to the manpage for
individual commands or the Software Distributor Administration Guide
which can be found at:
http://www.docs.hp.com/en/SD