Software Distributor defects fixed in HP-UX 11i v1, v2 and v3

OnlineDiag is available at http://www.software.hp.com in the Enhancement releases and patch
bundles section, or on the HP-UX 11i v2 OE media (September 2004 and later). Installation
instructions are available at: http://docs.hp.com/hpux/onlinedocs/diag/st/st_inst.htm
Requirements for Boot Support: AD193A/AD194A, 403619–B21, AB378A, AB378B, AB379A,
AB379B. A6826A. A9782A, A9784A, AB465A
To boot through the fibre channel ports on these adapters, HP recommends that you update the
EFI driver and onboard firmware to the latest version. The following table lists the recommended
EFI and firmware versions at the release of FibrChanl-01 (fcd) driver, version B.11.23.0807 or
later:
Table 19 Recommended Firmware Versions (July 2008 or later)
Firmware VersionEFI Driver VersionFibre Channel Adapter
4.00.70 or later1.05 or laterAD193A/AD194A
4.00.90 or later1.09 or later403619–B21
4.00.70 or later1.05 or laterAD300A
4.00.70 or later1.05 or laterAB378A
4.00.70 or later1.05 or laterAB378B
4.00.70 or later1.05 or laterAB379A
4.00.70 or later1.05 or laterAB379B
3.03.154 or later1.49 or laterA6826A
3.03.154 or later1.49 or laterA9782A
3.03.154 or later1.49 or laterA9784A
3.03.154 or later1.49 or laterAB465A
For current recommended firmware versions, see the HP Fibre Channel (fcd and fclp) Host Bus
Adapter Support Matrix at http://docs.hp.com/en/netcom.html#Fibre%20Channel
NOTE: Display EFI driver and ROM firmware versions using fcmsutil <fcd_device_file>
vpd
EFI/firmware bundles can be downloaded from www.hp.com, in the Software and Driver Downloads
section.
Hardware Requirements
This version of the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 runs
on HP Integrity servers with the HP-UX 11i v2 (11.23) operating system. It supports Fibre Channel
hardware products such as:
• AD193A/AD194A PCI-X 4Gb FC and 1000BT Combination Card
• 403619–B21 PCIe Dual Port 4Gb Fibre Channel Adapter
• AD300A PCIe Dual Port 4Gb Fibre Channel Adapter
• AB378B PCI-X Single Port 4Gb Fibre Channel Adapter
• AB379B PCI-X Dual Port 4Gb Fibre Channel Adapter
• AB378A PCI-X Single Port 4Gb Fibre Channel Adapter
• AB379A PCI-X Dual Port 4Gb Fibre Channel Adapter
• AB6826A PCI-X Dual Port 2 Gb/1 Gb Fibre Channel Adapter
• A9782A PCI-X 2Gb Fibre Channel and 1000Base-SX (Fiber) Gigabit Ethernet Combination
Card
Compatibility and Installation Requirements 27